IB Chemistry IA: Is a Simple Titration Good Enough?

9 min read

Oct 30, 2026

#IB Chemistry IA#Chemistry IA Research Questions#Redox Titration#IB Chemistry Internal Assessment
IB Chemistry IA: Is a Simple Titration Good Enough? cover image

You have an idea for your IB Chemistry Internal Assessment: determine the iron content of a supplement using redox titration. The equipment is available, the chemistry makes sense and you understand the calculations.

But is it too simple?

That question appeared in a February 2026 r/IBO discussion, where an SL student worried that investigating iron tablets might not be sophisticated enough for a strong IA.

The concern is understandable. Online Chemistry IA examples often feature unfamiliar techniques, complicated reactions and extensive calculations.

However, a strong investigation is not defined by how complicated its apparatus or chemistry appears.

What matters is whether the research question supports a meaningful investigation, the methodology produces relevant data, and the analysis and evaluation demonstrate scientific understanding.

There is one important qualification: the IB expects students to develop an individual investigation, not merely repeat a standard classroom practical.

Here is how to turn a familiar titration technique into a focused and defensible Chemistry IA.

Does the IB Reward Complicated Chemistry IA Topics?

The official IB Chemistry guide, first assessed in 2025, states that the scientific investigation does not need to explore concepts beyond those taught in the course.

The investigation must, however, have sufficient depth to address the assessment criteria.

This distinction matters.

A student who uses an advanced analytical instrument without understanding its limitations has not necessarily demonstrated stronger scientific reasoning than someone performing a carefully designed titration.

At the same time, the IB's 2027 examiner instructions caution against investigations that simply repeat a classic experiment or a prescribed practical technique. Students can adapt and extend an established procedure.

The titration method can be conventional. Your investigation must still have an individual, purposeful research design.

Understand the Four Chemistry IA Assessment Criteria

Under the current Chemistry curriculum, the scientific investigation contributes 20% of the final grade at both SL and HL.

The written report has a maximum of 3,000 words and is assessed using four equally weighted criteria.

Assessment criterionMaximum marksWhat matters
Research design6A focused research question and justified, reproducible methodology
Data analysis6Accurate processing, clear presentation and appropriate treatment of uncertainty
Conclusion6An evidence-supported answer connected to accepted chemistry
Evaluation6Specific methodological limitations and justified improvements
Total24

These criteria are detailed in the official Chemistry guide.

Unlike the older Chemistry IA framework, the current assessment does not include a separate Personal Engagement criterion.

Independent decision-making remains important, especially when developing your research question and methodology.

Why Iron Tablet Titration Is a Useful Starting Point

Iron supplements offer an accessible context for investigating redox chemistry, quantitative analysis and measurement reliability.

Some tablets contain iron in the +2 oxidation state, often supplied through compounds such as ferrous sulfate or ferrous fumarate.

Acidified potassium manganate(VII), commonly called potassium permanganate, can oxidise iron(II) ions to iron(III) ions.

The balanced ionic equation is:

[ \mathrm{MnO_4^- + 5Fe^{2+} + 8H^+ \rightarrow Mn^{2+} + 5Fe^{3+} + 4H_2O} ]

The important relationship is:

One mole of permanganate reacts with five moles of iron(II).

Using the concentration and volume of the permanganate solution, students can calculate the amount of iron(II) that reacted.

This provides opportunities to explore stoichiometry, solution preparation, analytical precision and experimental limitations.

However, a direct titration measures the sample's response to the oxidising reagent. It does not automatically establish the total elemental iron content of every supplement formulation.

That distinction becomes important when designing the IA.

Turn a Basic Experiment Into a Research Question

A starting idea might be:

Determine the iron content of an iron tablet.

This describes an analytical task but does not clearly establish an individual investigation.

Consider these alternatives:

Research directionPotential research questionImportant consideration
Extraction durationHow does extraction time affect the measurable iron(II) recovered from a specified tablet formulation?Control temperature, sample preparation and oxidation
Extraction temperatureHow does extraction temperature affect the amount of soluble iron(II) recovered after a fixed extraction period?Temperature may affect both dissolution and oxidation
Solution stabilityHow does the time between solution preparation and titration affect measured iron(II) concentration?The effect must be detectable during feasible laboratory intervals
Formulation comparisonHow does measured iron(II) content differ between specified supplement formulations?Additional ingredients may interfere with the titration

These are original investigation directions, not approved IA questions.

Each requires a pilot study, suitable control variables and teacher approval.

Adding a variable simply to make an experiment appear more sophisticated is not necessarily helpful.

Choose a relationship you can investigate chemically and explain convincingly.

An Example of a More Focused Investigation

Suppose a student wants to investigate whether extraction duration influences the amount of iron(II) recovered from a particular ferrous supplement.

A provisional question could be:

How does extraction duration affect the measurable concentration of iron(II) recovered from a specified ferrous iron tablet under controlled temperature and extraction conditions, as determined by acidified potassium manganate(VII) titration?

This establishes a potential independent variable, dependent variable and analytical technique.

The student would need to justify the chosen time intervals, determine suitable replication and identify how extraction will be stopped or standardised.

A pilot investigation may reveal that the tablet dissolves quickly and that longer extraction produces almost no measurable difference.

That is useful feasibility evidence.

The student could then revise the question rather than collecting an entire dataset that cannot meaningfully distinguish the proposed conditions.

The aim is not to manufacture a significant trend. It is to investigate a chemically defensible relationship.

Control Variables That Can Change Your Results

A titration investigation is only as convincing as its control of competing influences.

Variable or conditionWhy it mattersPossible control
Tablet formulationDifferent ingredients may alter extraction or react with the titrantUse one specified formulation for a controlled investigation
Sample quantityChanges the amount of iron availableStandardise tablet mass or number
Extraction conditionsInfluence dissolution and possible chemical changesMaintain defined solvent, temperature and mixing conditions
Solution preparationAffects dilution and concentration calculationsUse appropriate volumetric glassware
Time before titrationIron(II) may undergo oxidation during handlingStandardise preparation and measurement intervals
Permanganate concentrationDirectly affects calculated iron contentUse a properly standardised titrant

The University of Massachusetts Lowell analytical chemistry laboratory manual discusses the importance of permanganate standardisation and solution stability.

For an IA, explain why your chosen controls are necessary rather than presenting a list without justification.

Worked Example: Calculating Iron Content

Consider an illustrative dataset, not actual student results.

A student prepares a tablet solution with a total volume of 100.0 cm³ and analyses a 25.00 cm³ aliquot.

The standardised potassium manganate(VII) concentration is 0.00200 mol dm⁻³, and the mean titre is 18.60 cm³.

First, calculate the amount of permanganate:

[ n(\mathrm{MnO_4^-})=0.00200\times0.01860 ]

[ =3.72\times10^{-5}\ \mathrm{mol} ]

From the balanced equation, the amount of iron(II) in the aliquot is:

[ n(\mathrm{Fe^{2+}})=5(3.72\times10^{-5}) ]

[ =1.86\times10^{-4}\ \mathrm{mol} ]

The total solution contains four times the amount present in the aliquot:

[ n_{\text{total}}(\mathrm{Fe^{2+}}) =7.44\times10^{-4}\ \mathrm{mol} ]

Using the molar mass of iron, approximately 55.85 g mol⁻¹:

[ m(\mathrm{Fe})=7.44\times10^{-4}\times55.85 ]

[ \approx 0.0416\ \mathrm{g}=41.6\ \mathrm{mg} ]

The calculation suggests approximately 41.6 mg of iron(II), expressed as elemental iron mass, in the prepared sample.

If the tablet label stated 45 mg elemental iron, the numerical difference would be approximately 7.6% below the labelled value.

However, that difference cannot automatically be attributed to inaccurate manufacturing.

The measurement depends on complete extraction, the iron oxidation states present, titrant specificity and other assumptions.

This calculation illustrates data processing, not a complete IA investigation.

Understand the Difference Between Iron(II) and Total Iron

One of the most important scientific limitations involves the actual chemical species measured.

The permanganate reaction above directly quantifies iron(II) under suitable conditions.

If some iron(II) has already oxidised to iron(III), the measured amount may be lower than the original iron(II) content.

Conversely, another reducing ingredient may also react with permanganate, increasing titrant consumption and making an iron-only calculation misleading.

For example, some supplements contain vitamin C, which is itself a reducing agent.

The Oregon State University Linus Pauling Institute explains that vitamin C participates in iron redox chemistry by facilitating the reduction of iron(III) to iron(II).

Students should check the full supplement formulation and consider whether other substances could interfere.

Choosing a simpler formulation or using a validated method for distinguishing iron from other reducing agents may improve the investigation's chemical validity.

Do not describe a result as total elemental iron without establishing that the method supports that conclusion.

How to Demonstrate Strong Data Analysis

A reliable dataset requires more than several titre values and their average.

Record raw burette readings, calculate titres, identify genuinely concordant results and explain how representative values were selected.

Use correctly labelled tables, consistent precision and appropriate units.

Uncertainty should be considered for measurements that materially affect the final result, including titrant concentration, delivered volumes and dilution.

If the burette has a stated reading uncertainty, account for both readings used to calculate a titre.

Where relevant, examine variation between independently prepared samples as well as repeated titrations of one solution.

These answer different questions.

Repeated titres investigate the consistency of the titration procedure. Independently prepared samples can also reveal variation introduced during extraction and sample preparation.

The two types of variation should not be treated as interchangeable.

Evaluate Specific Weaknesses, Not Generic Errors

The Evaluation criterion asks students to explain the impact of limitations and propose realistic improvements.

Potential weaknessPossible influence on resultsTargeted improvement
Incomplete tablet dissolutionIron(II) recovery may be underestimatedValidate extraction completeness under controlled conditions
Oxidation of iron(II) during handlingMeasured iron(II) may decreaseStandardise handling time and investigate solution stability
Other reducing ingredientsPermanganate consumption may be incorrectly attributed to iron(II)Verify sample composition or use a more selective validated method
Poorly established titrant concentrationAll calculated concentrations may be systematically affectedStandardise the titrant appropriately
Inconsistent endpoint identificationIncreased variation between titre valuesUse a clearly defined endpoint procedure and consistent technique

A weak evaluation might state:

Human error could have affected the results.

A stronger evaluation identifies the actual source and direction of possible error.

For example, oxidation of dissolved iron(II) before titration could produce a lower apparent iron(II) concentration, depending on the sample and conditions.

A proposed improvement should address that mechanism rather than simply recommend repeating the experiment.

What Should Your Conclusion Actually Say?

A meaningful conclusion answers the specific research question and explains how strongly the evidence supports the answer.

If extraction duration was the independent variable, analyse whether measured iron(II) recovery changed across the selected durations.

Discuss the size and consistency of any observed differences, taking uncertainty into account.

Compare your findings with relevant chemical theory and credible published information.

Do not claim that a difference is meaningful merely because two calculated averages are not identical.

Likewise, a result that differs from a supplement label does not automatically prove mislabelling.

A scientifically sound conclusion distinguishes what the data show, what the method assumes and what remains uncertain.

Laboratory Safety and Academic Integrity

Potassium permanganate is a strong oxidising agent, and acidic titration solutions require appropriate handling.

Students should use a teacher-approved procedure, suitable protective equipment and designated chemical waste disposal.

The IB Chemistry guide requires students to consider safety, ethical and environmental factors in their research design.

The investigation must also be the student's authentic work.

Use established laboratory procedures as referenced starting points, but independently develop the research question, justify modifications and analyse actual measurements.

Never invent titre values, change experimental results to create a preferred trend or submit another student's method and analysis unchanged.

Final Checklist: Is Your Titration IA Strong Enough?

Before committing to an IB Chemistry IA titration, check that:

  1. Your research question goes beyond simply repeating a classroom practical.
  2. You can explain the relevant redox chemistry and stoichiometry.
  3. The selected sample and reagents are suitable for the measurement.
  4. Your independent, dependent and controlled variables are clearly defined.
  5. A pilot test shows that useful data can be collected.
  6. Your plan allows appropriate replication and uncertainty analysis.
  7. Your evaluation can examine specific limitations and their effects.
  8. Your conclusion will answer the actual question rather than just report a titre.

A simple technique can support a rigorous Chemistry IA, but a simple repeat of a standard experiment is not enough.

Redox titration is a useful analytical method when students understand its chemical assumptions, collect reliable data and investigate a purposeful question.

Rather than making the experiment unnecessarily complicated, make the scientific reasoning more precise.

For the definitive assessment requirements, consult the IB Chemistry curriculum, the official Chemistry guide and your teacher's guidance for your assessment session.

Written By

Author Profile Picture

Aditi Sneha

Growth Strategist

Reviewed by Ayisha Shahani, IB Content Head at Koncepts.

Loading suggested posts