
IB Physics Paper 1B rewards students who can turn unfamiliar experimental information into a justified scientific conclusion. You might recognize the physics, but still lose marks by choosing the wrong graph gradient, ignoring uncertainty, or proposing an improvement that does not address the experiment's weakness.
Those concerns appear in April 2026 student discussions about Paper 1B and requests for targeted revision advice. The solution is to practise a repeatable approach to data, not just memorize more equations.
This guide follows the IB Physics guide for first assessment 2025, which governs the current course, and includes original practice questions with worked explanations.
What Is IB Physics Paper 1B?
Paper 1B consists of structured data-based questions within Paper 1. It assesses interpretation of experimental information, measurements, graphs, calculations and scientific reasoning. Both Standard Level (SL) and Higher Level (HL) students complete it.
| Assessment detail | SL | HL |
|---|---|---|
| Paper 1A marks | 25 | 40 |
| Paper 1B marks | 20 | 20 |
| Combined Paper 1 duration | 90 minutes | 120 minutes |
| Combined Paper 1 weight | 36% | 36% |
| Calculator and clean Physics data booklet | Required | Required |
The two booklets are completed during the same examination period. The IB does not assign a separate official time limit to Paper 1B. Unlike the multiple-choice Paper 1A, Paper 1B requires written working and explanations.
The IB Physics curriculum page emphasizes experimental work, mathematical reasoning and the limitations of scientific knowledge. That is the mindset Paper 1B rewards.
A Five-Step Method for Unfamiliar Data Questions
Before calculating, identify what was varied, what was measured, what was held constant, and what the question actually asks. Then:
- Read axis labels, table headings, units and uncertainty information.
- Look for a relationship, such as linear, inverse or curved, without assuming it is exact.
- Choose the calculation or graph feature that tests the relationship.
- Carry units and appropriate precision through the working.
- Finish with a conclusion tied to the evidence, including relevant limitations.
A statement like "the graph increases" describes a trend. "Force increases approximately in proportion to extension, consistent with a constant spring stiffness over the tested range" interprets it.
Worked Question 1: Interpret a Force and Extension Graph
Original practice data: A student hangs different loads from a spring and measures the extension. Assume readings are taken after the spring stops oscillating.
| Extension, x (m) | Force, F (N) |
|---|---|
| 0.040 | 0.81 |
| 0.080 | 1.61 |
| 0.120 | 2.39 |
| 0.160 | 3.21 |
| 0.200 | 3.99 |
Question: Describe the relationship and estimate the spring constant from a graph of F against x.
Worked answer: Put extension on the horizontal axis and force on the vertical axis. The points lie close to a straight line through the origin. Draw a line of best fit rather than connecting every dot. Using two widely separated points on the fitted line, approximately (0.040 m, 0.80 N) and (0.200 m, 4.00 N):
gradient = ΔF / Δx = (4.00 − 0.80) / (0.200 − 0.040) = 20 N/m
For a spring obeying Hooke's law, F = kx, so the gradient represents the spring constant, k ≈ 20 N/m. A small intercept consistent with zero supports the model; a substantial intercept could indicate an offset, preload or another limitation worth investigating.
Common error: Dividing extension by force produces the inverse of the required spring constant. Another mistake is taking the gradient between two noisy measurements instead of using the fitted line.
Worked Question 2: Calculate Percentage Uncertainty
Original practice question: At one load, a student measures force F = (4.00 ± 0.10) N and extension x = (0.200 ± 0.002) m. Estimate the uncertainty in k = F/x using the standard fractional uncertainty method.
First calculate the value:
k = 4.00 / 0.200 = 20.0 N/m
The percentage uncertainties are 0.10 / 4.00 × 100 = 2.5% for force and 0.002 / 0.200 × 100 = 1.0% for extension. For a quotient, add these fractional uncertainties under the conventional upper-bound approximation:
percentage uncertainty in k ≈ 2.5% + 1.0% = 3.5%
absolute uncertainty ≈ 0.035 × 20.0 = 0.7 N/m
Therefore, k = (20.0 ± 0.7) N/m. This estimate comes from a single pair of measurements. A gradient uncertainty obtained from a complete graph is a different assessment of uncertainty and need not give the same value.
Common error: Adding 0.10 N directly to 0.002 m is meaningless because their units differ. Convert to fractional uncertainties before combining a quotient.
Worked Question 3: Use Error Bars and Extreme Gradients
Error bars show the plausible range for each measurement. When asked for a gradient uncertainty, draw the best-fit line and the steepest and shallowest reasonable lines that are consistent with the given uncertainty bars.
Original practice question: A graph has a best-fit gradient of 20 N/m. The steepest acceptable line has gradient 22 N/m, and the shallowest has 18 N/m. Estimate gradient uncertainty.
A common graphical estimate is half the spread:
Δk ≈ (22 − 18) / 2 = 2 N/m
Report k = (20 ± 2) N/m, or about 10% uncertainty. These gradients are illustrative and are not calculated from the preceding data table. In an actual question, determine them from the plotted uncertainties.
Common error: Drawing extreme lines through arbitrary dots while ignoring error bars. Another is assuming a best-fit line must pass through the origin when the evidence does not support that constraint.
Worked Question 4: Decode Unfamiliar Gas Data
Original practice data: A sealed sample of gas is held at approximately constant temperature. Pressure changes as its volume changes.
| Volume (cm³) | Pressure (kPa) | Pressure × volume (kPa cm³) |
|---|---|---|
| 20 | 149 | 2,980 |
| 30 | 101 | 3,030 |
| 40 | 74.5 | 2,980 |
| 60 | 50.5 | 3,030 |
Question: Identify the relationship and suggest a graph that could test it.
Worked answer: As volume increases, pressure decreases. The products pV cluster around 3.0 × 10³ kPa cm³, suggesting p is approximately inversely proportional to V across these readings. Plot pressure against 1/V. An approximately straight line would support that interpretation, with the gradient representing the approximate constant pV in the chosen units.
The data alone do not establish an exact law at every volume. Temperature must remain controlled, and uncertainty should be considered before deciding whether variations in pV are significant.
Common error: Plotting pressure against volume and calling the curved relationship linear, or concluding that one pattern proves causation without considering the controlled conditions.
Worked Question 5: Evaluate Experimental Design
Original practice prompt: A student measures extension by reading the position of a moving spring once, using a ruler placed some distance behind it. Explain two improvements.
Model response: First, allow the spring to settle before reading its position and repeat measurements. This reduces variation caused by oscillation and improves reliability. Second, position the ruler close to the pointer and read at eye level, reducing parallax error. A fixed pointer also makes the reading position clearer.
A stronger evaluation links weakness → effect → improvement. Repeating readings can reduce random uncertainty in the mean but does not correct a miscalibrated ruler or an incorrectly chosen zero. For a systematic offset, check and correct the zero or calibrate the instrument.
Significant Figures, Units and Graph Mistakes
Report calculated values with precision justified by the measurements. For example, writing 20.000000 N/m from force and extension recorded to only a few significant figures implies unsupported precision. When reporting an uncertainty, use a sensible number of significant figures and align the value's decimal place with it.
For every graph, check the variable and unit on each axis, an appropriate scale, whether a best-fit line or curve is warranted, and the meaning of the gradient and intercept. Units are a useful diagnostic: gradient units are vertical axis units divided by horizontal axis units.
Do not confuse accuracy with precision. A precise instrument can repeatedly give similar readings that are inaccurate because of a calibration offset. Do not delete an outlier merely because it makes your graph less tidy; investigate possible causes and justify any decision about its use.
How to Manage Time Across Paper 1A and 1B
Because Paper 1B has 20 of 45 Paper 1 marks at SL and 20 of 60 at HL, a proportional starting point is about 40 minutes for Paper 1B at either level. This is a revision strategy, not an IB mandated allocation.
Practise using approximately five minutes to read the data and identify subquestions, thirty minutes to complete the calculations and explanations, and five minutes to check units, uncertainty and unfinished answers. Adjust the allocation based on the actual question and your performance in timed practice.
Do not spend several minutes refining a graph when the next part asks for a short explanation. Show enough working to make your method clear, even if a numerical answer later needs correcting.
Paper 1B Revision Checklist
Before your examination, make sure you can calculate percentage uncertainty; propagate it through products, quotients and powers; identify errors and useful improvements; interpret gradients, intercepts and areas when relevant; and test an unfamiliar relationship using an appropriate graph.
Practise using the official IB specimen papers and markschemes for the course first assessed in 2025. Compare your working with the relevant markscheme, then rewrite weak explanations in terms of evidence and consequences.
Frequently Asked Questions
Is IB Physics Paper 1B only for HL? No. Both levels complete a 20-mark Paper 1B.
Does Paper 1B have its own time limit? No. It shares the Paper 1 examination period with Paper 1A.
Do I need to memorize every possible experiment? No. You need physical understanding and transferable skills for analysing experimental information, including data from unfamiliar setups.
Are calculators and the data booklet allowed? Yes. The Physics guide specifies calculator use and a clean data booklet during Paper 1.
Final Advice
To improve at IB Physics Paper 1B, practise explaining what the data show, how confidently they show it, and what could make the evidence stronger. The strongest revision combines accurate calculations with experimental judgment. Use official specimen material to test these skills under timed conditions.
Table of contents
Share
Related reading
- IB Physics Past Papers: Which Old Questions Still Apply?Find which IB Physics old syllabus past papers still apply. Compare the 2025 syllabus, Paper 1A, Paper 1B and Paper 2, and practise smarter with our guide.
- IB Physics Paper 2: Multi-Step Question StrategiesMaster IB Physics Paper 2 questions with worked multi-step examples, data booklet tips, partial-mark strategies, and a practical time plan for exam day.
- IB Physics HL vs SL: The Maths That Changes EverythingChoosing IB Physics HL or SL? Compare maths demands, extra HL topics, current exam papers and university requirements to make a confident subject decision.
- IB History Paper 1: Mastering OPCVL Source AnalysisLearn IB History Paper 1 OPCVL using real historical sources, model evaluations, and clear 2027 versus 2028 exam guidance. Improve your source analysis today.
- IB Business Paper 2: How to Evaluate 10-Mark QuestionsLearn to evaluate IB Business Paper 2 10 markers using case evidence, stakeholder trade-offs, and supported recommendations. Improve your exam answers today.
- IB Economics Paper 2: Diagrams and Data ResponsesMaster IB Economics Paper 2 with contextual diagrams, worked data calculations, policy evaluation and original stimulus questions for SL and HL exams.
- IB Geography IA: Fieldwork Sampling and Data AnalysisLearn IB Geography IA fieldwork sampling methods, data analysis, maps and evaluation with an original example. Plan a stronger investigation with this guide.
- IB Physics IA: What If Your Data Differs From Theory?Learn IB Physics IA data analysis with worked examples covering percentage error, propagated uncertainty, graphs and honest evaluation. Read the guide.
